Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 55
2
Switch Management Access Control
The following commands configure user login information and access settings for
the switch management interfaces. Switch management can be performed
through the web-based interface, a command line interface (CLI), or SNMP.
This section contains the following subsections:
• Authentication Methods
• User Logins and Passwords
• Management Access—General
• HTTP Access
• Telnet Access
• SSH Access
• Console Access
• Management Access Lists
Authentication Methods
ip http authentication
Use this command to specify authentication methods for HTTP server users. To
return to the default, use the no form of this command. The supported methods
are local or RADIUS.
ip http authentication method1 [method2]
no ip http authentication
show poe port
configuration
Displays PoE configuration for a specific port or all ports.
show poe port
info
Displays PoE status for a specific port or all ports.
Command Description