Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 317
7
Syntax Descriptions
Default
maximum response time—10 seconds
Command Modes
VLAN Config
Related Commands
set mld mcrtrexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is
set on a particular VLAN. This is the amount of time in seconds that a switch waits
for a query to be received on an interface before the interface is removed from the
list of interfaces with multicast routers attached. Use the no form of the command
to reset it to the default value.
set mld mcrtrexpiretime vlan-id 0-3600
no set mld mcrtrexpiretime vlan-id
Syntax Descriptions
Parameter Description
vlan-id The ID of the VLAN to configure.
2–65 The maximum response time. The range is 2–65 seconds.
This value must be less than the MLD Query Interval time
value.
Command Description
show
mldsnooping
Displays MLD Snooping information.
Parameter Description
vlan-id The ID of the VLAN to configure.