Cisco Small Business 200 Series

IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 390
10
clear network ipv6 dhcp statistics
Use this command to clear the DHCPv6 client statistics on the network
management interface.
clear network ipv6 dhcp statistics
Command Modes
Privileged Exec
Related Commands
dhcp client vendor-id-option
Use this command to enable the DHCP Option-60 (i.e., the vendor class) option.
Use the no form of the command to disable it.
dhcp client vendor-id-option
no dhcp client vendor-id-option
Command Modes
Global Config
Related Commands
Command Description
show network
ipv6 dhcp
statistics
Displays the statistics of the DHCPv6 client running on the
network management interface.
Command Description
dhcp client
vendor-id-option-
string
Sets the vendor ID option string that is sent in DHCP
packets for option-60 sent.
show dhcp client
vendor-id-option
Shows whether the switch sends the vendor ID option
string as option-60 in DHCP client packets and displays
the contents of the string.