Cisco Small Business 200 Series

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 101
2
clock summertime recurring
Use this command to set the summertime (daylight savings time) offset to UTC
recursively every year. If the optional parameters are not specified, they are read
as either '0' or '\0', as appropriate. Use the no form of this command to remove the
summertime configuration.
clock summer-time recurring {usa | eu | {start-week day month hh:mm week day month
hh:mm}} [offset offset] [zone acronym]
no clock summertime
Syntax Descriptions
clock timezone
config dhcp
Sets the clock operational data with the time zone details
received from DHCP server.
Parameter Description
usa The recurring daylight savings time offset is configured to
the U.S. standard.
eu The recurring summertime offset is configured to the
European standard.
week Week of the month. The range is 1–5, from first to last
week.
day Day of the week, identified by a three-letter abbreviation
(for example sun, for Sunday).
month Month, identified by a three-letter abbreviation (for
example Jan, for January).
hh:mm Time in 24-hour format in hours and minutes. The range for
hh is 0–23 and the range for mm is 0–59.
offset The number of minutes to add during the summertime. The
range is 1–1440 minutes.
acronym The acronym, up to four characters, for the time zone to be
displayed when summertime is in effect.
Command Description