Cisco Small Business 200 Series

VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 223
4
Related Commands
switchport general ingress-filtering disable
Use this command to disable port ingress filtering. To enable ingress filtering on a
port, use the no form of this command.
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default
Ingress filtering is enabled.
Command Mode
Interface Config
switchport trunk allowed vlan
Use this command to add or remove a trunk port as a tagged member of one or
more VLANs.
switchport trunk allowed vlan {add vlan-list | remove vlan-list}
Syntax Descriptions
Command Mode
Interface Config
Command Description
switchport
general allowed
vlan
Adds VLANs to or remove VLANs from a general port.
Parameter Description
vlan-list The VLAN IDs to be added to or removed from the port
VLAN memberships, separated by a space.