Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 86
2
show ip ssh
Use this command to display SSH settings.
show ip ssh
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show ip ssh
SSH Configuration
Administrative Mode: .......................... Enabled
Protocol Levels: .............................. Versions 1 and 2
SSH Sessions Currently Active: ................ 0
Max SSH Sessions Allowed: ..................... 2
SSH Timeout: .................................. 5
Keys Present: ................................. DSA RSA
Key Generation In Progress: ................... None
Console Access
This section describes the commands you use to configure properties for the
console connection to the switch CLI.
line console
Use this command in Global Config mode to enter the Line (Console) Config Mode,
where you set properties of the console port.
line console
Command Modes
Global Mode
sshcon
maxsessions
Configures the number of remote SSH connections
allowed.
show ip ssh Shows SSH configuration information.
Command Description