Cisco Small Business 200 Series

Security
MAC Based Port Security
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 365
8
Default
Port security is disabled globally.
Command Modes
Global Config
Interface Config
Related Commands
port-security mac-address move
Use this command to convert dynamically locked MAC addresses to statically
locked addresses on an interface.
port-security mac-address move
Command Modes
Interface Config
Related Commands
port-security max-dynamic
Use this command to set the maximum number of dynamically locked MAC
addresses allowed on a specific port. Use the no form of the command to reset it
to the default value.
port-security max-dynamic maxvalue
no port-security max-dynamic
Command Description
show port-
security
Displays the port-security settings.
Command Description
show port-
security
Displays the port-security settings.