Cisco Small Business 200 Series

SNMP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 417
11
Default
These traps are enabled.
Command Modes
Global Config
Related Commands
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled,
link traps are sent only if the Link Trap flag setting associated with the port is
enabled. Use the no form of the command to disable it.
snmp-server enable traps linkmode
no snmp-server enable traps linkmode
Default
These traps are enabled.
Command Modes
Global Config
Related Commands
Command Description
show trapflags Displays trap conditions.
Command Description
show trapflags Displays trap conditions.