Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 78
2
• line—Character mode
• noecho—Disabled
Command Modes
Privileged Exec
Related Commands
telnetcon timeout
Use this command to set the Telnet connection session timeout value in minutes. A
session is active as long as the session has not been idle for the value set. Use the
no form of this command to reset the timeout to the default.
telnetcon timeout 1-160
no telnetcon timeout
Syntax Descriptions
Default
timeout—5 minutes
Command Modes
Privileged Exec
Command Description
ip telnet server
enable
Enables Telnet connections to the system and enables the
Telnet Server Admin Mode.
show network Displays configuration settings associated with the
switch's management interface.
show telnetcon Displays Telnet configuration and status information.
Parameter Description
1-160 The timeout value in minutes.