Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 300
7
show mac-address-table staticfiltering
Use this command to display the Static Multicast Filtering entries in the Multicast
Forwarding Database (MFDB) table.
show mac-address-table staticfiltering
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show mac-address-table staticfiltering
MAC Address Type Description Interfaces
----------------------- ------- ---------------- -------------------
00:01:55:33:00:00:00:01 Static Mgmt Config Fwd: e2,e4
Related Commands
macfilter adddest
all
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLAN ID.
show mac-
address–table
static filtering
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.
Command Description
macfilter Adds a static filter entry with MAC-layer station source
address or IP Group Address.
macfilter adddest
all
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLAN ID.
Command Description