Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 247
4
auto-voip protocol-based
Use this command to enable the protocol-based VoIP Profile on an interface. Use
the no form of the command to disable the profile.
auto-voip protocol-based
no auto-voip protocol-based
Default
The protocol-based VoIP profile is disabled on all interfaces.
Command Modes
Interface Config
Related Commands
auto-voip protocol-based all
Use this command to enable the protocol-based VoIP profile on all switch
interfaces. Use the no form of the command to disable the profile.
auto-voip protocol-based all
no auto-voip protocol-based all
auto-voip oui-
prioirity
Configure the class-of-service priority assigned to OUI-
based VoIP traffic.
show auto-voip
oui-based
Displays the VoIP Profile settings on the interface or
interfaces.
Command Description
auto-voip
protocol-based
all
Enables the VoIP Profile on all the interfaces of the switch.
show auto-voip
protocol-based
Displays the VoIP Profile settings on the interface or
interfaces of the switch.
show auto-voip
sessions
Displays the currently running Auto-VoIP sessions on an
interface or interfaces.
Command Description