Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 269
5
Examples
The following command sets the path cost for mst 1.
(switch) (Interface e1)#spanning-tree mst 1 cost 1000
The following command sets the port priority for mst 1
(switch) (Interface e1)#spanning-tree mst 1 port-priority 240
The following command sets the external path cost for the common and internal
spanning tree (mst instance 0).
(switch) (Interface e1)#spanning-tree mst 0 external-cost 1000
Related Commands
Command Description
spanning-tree
port mode all
Enables the spanning tree administrative mode for all the
ports.
spanning-tree
port mode
Enables the spanning tree administrative mode on a specific
port.
spanning-tree
configuration
name
Sets the MST Configuration Identifier Name, which
identifies the configuration that the switch is currently using.
spanning-tree
mst instance
Adds a multiple spanning tree instance to the switch.
spanning-tree
mst vlan
Adds an association between a multiple spanning tree
instance and one or more VLANs so that the VLAN(s) are no
longer associated with the common and internal spanning
tree.
spanning-tree
priority
Configures the spanning tree bridge priority.
spanning-tree
mst
Sets the Path Cost or Port Priority for the specified port
within the multiple spanning tree instances or in the
common and internal spanning tree.
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.