Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 309
7
Syntax Descriptions
Command Modes
Privileged Exec
Examples
When the optional argument vlan-id is not used, the command displays the
following information.
(switch) #show igmpsnooping
Admin Mode..................................... Disable
Multicast Control Frame Count.................. 0
VLANs enabled for IGMP snooping................ None
When you specify a value for vlan-id, the following information appears.
(switch) #show igmpsnooping 2
VLAN ID........................................ 2
IGMP Snooping Admin Mode....................... Disabled
Fast Leave Mode................................ Disabled
Group Membership Interval (secs)............... 260
Max Response Time (secs)....................... 10
Multicast Router Expiry Time (secs)............ 0
Parameter Description
vlan-id The ID of the VLAN to configure.
Admin Mode Indicates whether or not IGMP Snooping is active on the
switch.
Multicast
Control Frame
Count
The number of multicast control frames that are processed
by the CPU.
VLANS Enabled
for IGMP
Snooping
The list of VLANS on which IGMP Snooping is enabled.