Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 313
7
Examples
The following shows sample output for the command.
(Switch) #show mac-address-table igmpsnooping
MAC Address Type Interfaces
----------------------- ------- --------------
00:01:01:00:5E:01:02:03 Dynamic Fwd: e24
The following fields display for the configured IGMP Snooping table entries:
Related Commands
MAC Address A multicast MAC address for which the switch has
forwarding or Filtering information. The format is two-digit
hexadecimal numbers that are separated by colons, for
example 00:01:01:00:5e:01:02:03. In an IVL system the MAC
address is displayed as a MAC address and VLAN ID
combination of 8 bytes.
Type The type of the entry, which is either static (added by the
user) or dynamic (added to the table as a result of a learning
process or protocol).
Interfaces The list of interfaces that are designated for forwarding
(Fwd:) and filtering (Flt:).
Command Description
set igmp Enables IGMP snooping on a particular VLAN.
To Next Page
Loading...
