Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 71
2
Defaults
• Default user: cisco
• Default password for cisco user: cisco
Command Modes
Global Config
Usage Guidelines
The cisco user can not be deleted.
Users created using this command have full administrative privileges.
Examples
The following example configures a user name and password with encryption.
Switch(config)#username "user1" password fb3604df5a109405b2d79ecb06c47ab5
encrypted
Related Commands
encrypted The password as entered is an encrypted value, which has
been copied from another switch where it was encrypted.
nopassword Specifies that the user has no passwords.
override-
complexity check
Specifies that the password will not be checked to meet
any password criteria configured using the passwords
strength-check commands.
Command Description
passwords min-
length
Enforces a minimum password length for local users.
passwords aging Implement aging on passwords for local users.
password Allows a user to change their password after it has
expired.
show users Displays the configured user names and their settings.
Parameter Description