Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 279
5
Syntax Descriptions
Command Modes
Privileged EXEC
Examples
The following shows sample output for the command:
(Switch) #show spanning-tree mst port detailed 10 e12
MST Instance ID................................ 10
Port Identifier................................ 80:56
Port Priority.................................. 128
Port Forwarding State.......................... Disabled
Port Role...................................... Disabled
Auto-calculate Port Path Cost.................. Enabled
Port Path Cost................................. 0
Designated Root................................ 80:0A:00:11:88:2A:35:41
Root Path Cost................................. 0
Designated Bridge.............................. 80:0A:00:11:88:2A:35:41
Designated Port Identifier..................... 00:00
Loop Inconsistent State........................ FALSE
Transitions Into Loop Inconsistent State....... 0
Transitions Out Of Loop Inconsistent State..... 0
Related Commands
Parameter Description
mstid The multiple spanning tree instance ID.
interface The interface ID.
Command Description
spanning-tree
configuration
name
Sets the MST Configuration Identifier Name, which
identifies the configuration that the switch is currently using.
spanning-tree
mst instance
Adds an MST instance to the switch.
spanning-tree
priority
Configures the spanning tree bridge priority.