Cisco Small Business 200 Series

Quality of Service
Rate Limit Profile Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 372
9
Syntax Descriptions
Command Modes
Global Config
Examples
The following command creates a rate limit for VLAN 2 traffic.
(switch) (Config)#rate-limit profile 1 cir 64 cbs 64 vlan 2
Related Commands
Parameter Description
profile-id An ID number you assign to the profile. The range is 1–64.
cir The committed information rate, which is the rate at which
data is transmitted. The rate is averaged over a minimum
time increment.
cir-value The committed information rate value in Kbps. The range is
64 Kbps to the port max speed.
cbs The committed burst size in KB, which guarantees amount
of bandwidth for “bursty” traffic on the port. The range is
4–16384KB KB.
burst-size The committed burst size value in Kbps. The range is 4–
16384 Kbps.
vlan-id The VLAN ID this profile applies to.
Command Description
rate-limit profile
(Interface)
Applies a profile on a port.
show rate-limit
profile
Displays parameters configured in a profile.