Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 210
3
Related Commands
Admin State Indicates the following values, separated by a vertical bar:
ACT or PSU—The port LACP mode:
• ACT (Active mode)—The port sends LACPDUs on
the switch at a configurable interval.
• PSU (Partner mode)—The port only responds to
LACPDUs sent from active ports.
AGG or IND—The port mode with respect to link
aggregation:
• AGG (Aggregate mode)—The port is participating a
link aggregation.
• IND (Individual mode)—The port is not participating
in link aggregation and is functioning as an
individual port.
LTO or STO—The time after which an LACPDU is no longer
valid:
• LTO (Long Timeout)—The LAG member receives
less frequent LACP transmissions and retains the
information longer.
• STO (Short Timeout)—The LAG member receives
more frequent periodic LACP transmissions and
more aggressively times-out the information it
receives.
Command Description
show lacp partner Displays LACP partner attributes.
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.
show port
channel
Displays an overview of all LAGs on the switch.