Cisco Small Business 200 Series

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 330
8
Related Commands
Command Description
radius server key Configures the key to be used in RADIUS client
communication with the specified server.
radius server
priority
Specifies the order in which the servers are to be used.
radius server
deadtime
Improve RADIUS response times when servers are
unavailable.
radius server
attribute nas-ip-
addr
Specifies the RADIUS client to use the NAS-IP Address
attribute in the RADIUS requests.
radius server
msgauth
Enables the Message Authenticator attribute to be used
for the specified RADIUS server.
radius server
retransmit
Globally configures the number of unsuccessful
transmissions of RADIUS messages that the client must
make before it attempts to use the fall back server.
radius server
timeout
Globally configures the timeout value (in seconds) after
which the RADIUS client must retransmit to the RADIUS
server if no response is received.
show radius Displays the configured global parameters of the RADIUS
client.
show radius
servers
Displays summary data and details on RADIUS servers.
show radius
statistics
Displays the summary statistics of configured RADIUS
servers.