Cisco Small Business 200 Series

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 360
8
If you use the optional parameter statistics interface, the following 802.1X
statistics for the specified port display.
(switch) #show dot1x statistics e15
Port........................................... e15
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
Server Timeout The timer used by the authenticator on this port to timeout
the authentication server. The value is expressed in
seconds and will be in the range of 1–65535.
Maximum
Requests
The maximum number of times the authenticator state
machine on this port will retransmit an EAPOL EAP Request/
Identity before timing out the supplicant. The value will be in
the range of 1–10.
Reauthenticatio
n Period
The timer used by the authenticator state machine on this
port to determine when reauthentication of the supplicant
takes place. The value is expressed in seconds and will be
in the range of 1–65535.
Reauthenticatio
n Enabled
Indicates if reauthentication is enabled on this port. Possible
values are 'True" or "False".
Key
Transmission
Enabled
Indicates if the key is transmitted to the supplicant for the
specified port. Possible values are True or False.
Session
Timeout
The time for which the given session is valid. The time
period in seconds is returned by the RADIUS server on
authentication of the port.
Session
Termin ation
Action
The action to be taken once the session timeout expires.
Possible values are Default, Radius-Request. If the value is
Default, the session is terminated the port goes into
unauthorized state. If the value is Radius-Request, then a
reauthentication of the client authenticated on the port is
performed.