Cisco Small Business 200 Series

Administration
PoE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 39
2
Syntax Descriptions
Default
No LLDP capabilities are advertised.
Command Modes
Interface Config
Examples
The following example includes the network policy TLV in LLDP advertisements on
port e7.
(Switch) (Interface e7)#lldp med transmit-tlv network-policy
Related Commands
Parameter Description
capabilities Includes the switch capabilities TLV in LLDP
advertisements.
ex-pse Includes the extended power sourcing equipment TLV in
LLDP advertisements. This keyword is available only on
switches that support PoE.
inventory Includes the switch inventory TLV in LLDP advertisements.
location Includes the switch location TLV in LLDP advertisements.
network-policy Includes the switch network policy TLV in LLDP
advertisements.
Command Description
lldp med
transmit-tlv
Specifies the optional Type Length Values (TLVs) in the
LLDP MED set that are transmitted in the Link Layer
Discovery Protocol Data Units (LLDPDUs) on all ports.