DISASSEMBLY
(1) Using a flat-bladed pry tool, pry fuel cap
retaining ring free from cap assembly (Fig. 2).
(2) Remove threaded portion of cap assembly (Fig.
3).
(3) Remove lock cylinder engagement collar and
tether (Fig. 4).
(4) Depress the spring loaded lock cylinder retain-
ing clip (Fig. 5) and remove the lock cylinder from
the cap (Fig. 6).
Fig. 2 Removing Retaining Ring
1 – RETAINING RING
Fig. 3 Step 2
1 – O-RING
Fig. 4 Step 3
1 – TETHER
Fig. 5 Step 4
1 – LOCK CYLINDER
2 – LOCK CYLINDER RETAINING CLIP
14 - 2 FUEL SYSTEM LH
DISASSEMBLY AND ASSEMBLY (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID
To Next Page
Loading...
