Chrysler 2000 LHS - City Lamp Bulb; Front Fog Lamp; Front Fog Lamp Bulb; Front Fog Lamp Electrical Connector

(3) Pull the city lamp bulb straight from its socket
(Fig. 6).
INSTALLATION
(1) Push the city lamp bulb into the lamp socket.
(2) Verify lamp operation.
(3) Install the city lamp socket into the headlamp
assembly.
(4) Install the headlamp assembly.
FRONT FOG LAMP BULB
Removal
(1) Remove the front fog lamp attaching screws
(Fig. 7).
(2) Pull the fog lamp assembly from the bumper
fascia and disconnect the electrical connector (Fig. 8).
(3) Remove the fog lamp assembly rear cover from
the fog lamp assembly (Fig. 9).
(4) Disengage the fog lamp bulb retaining wire and
remove the bulb from the fog lamp assembly (Fig.
10).
Fig. 6 City Lamp Bulb
1 – CITY LAMP BULB
2 – CITY LAMP HOUSING
Fig. 7 Front Fog Lamp
1 – FRONT FOG LAMP ATTACHING SCREWS
2 – FRONT FOG LAMP ASSEMBLY
3 – FRONT BUMPER FASCIA
Fig. 8 Front Fog Lamp Electrical Connector
1 – FRONT FOG LAMP ASSEMBLY
2 – ELECTRICAL CONNECTOR
8L - 10 LAMPS LH
REMOVAL AND INSTALLATION (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID