Chrysler 2000 LHS - Front Parking and Turn Signal Lamp Bulb - Lhs; Front Parking, Side Marker, and Turn Signal Lamp Bulb - Concorde; Front Parking, Side Marker, and Turn Signal Lamp Bulb - Intrepid

(2) Connect wire connector to the socket.
(3) Verify fog lamp operation and alignment.
(4) Install fog lamp housing into fascia.
(5) Install fog lamp screw to the front fascia
FRONT PARKING AND TURN SIGNAL LAMP
BULB - LHS
REMOVAL
(1) Remove headlamp housing from vehicle.
(2) Disconnect wire connector from back of lamp
socket(s).
(3) Rotate socket and pull lamp socket from head-
lamp housing.
(4) Remove bulb from lamp socket.
INSTALLATION
(1) Push bulb into lamp socket.
(2) Place lamp socket into headlamp housing and
rotate to the lock position.
(3) Connect wire connector to lamp socket(s).
(4) Verify headlamp operation.
(5) Install headlamp housing.
(6) Verify headlamp operation and alignment.
FRONT PARKING, SIDE MARKER, AND TURN
SIGNAL LAMP BULB – CONCORDE
REMOVAL
(1) Reach under the fascia and remove the socket
from the lamp housing (Fig. 6).
(2) Rotate and pull socket from lamp housing.
(3) Pull bulb from socket.
INSTALLATION
(1) Push bulb into socket.
(2) Install socket into lamp housing.
(3) Verify park and turn signal lamp operation.
FRONT PARKING, SIDE MARKER, AND TURN
SIGNAL LAMP BULB – INTREPID
REMOVAL
(1) Release hood latch and open hood.
(2) Remove jackscrews attaching headlamp to
crossmember.
(3) Remove lamp housing to access the lamp
socket.
(4) Remove lamp socket from lamp housing (Fig.
7).
(5) Pull bulb from socket.
INSTALLATION
(1) Push bulb into socket.
(2) Install lamp socket in lamp housing.
(3) Verify lamp operation.
(4) Place headlamp in position on vehicle.
(5) Install jackscrews to attach headlamp housing
to crossmember.
Fig. 5 Fog Lamp Bulb – LHS
1 – FOG LAMP BULB/SOCKET
2 – FOG LAMP
Fig. 6 Parking, Side Marker, and Turn Signal Lamp
Bulb – Concorde
1 – BULB
2 – SOCKET
8L - 14 LAMPS LH
REMOVAL AND INSTALLATION (Continued)