Chrysler 2000 LHS - Headlamp Washer Hoses; Washer Reservoir Filler Tube Mounting Bolt; Washer Reservoir Filler Tube Removal

(4) Partially remove the front fascia to gain access
to the windshield/headlamp washer reservoir. Refer
to Group 23, Body for Removal and Installation pro-
cedures.
(5) Reach up behind the washer reservoir and pull
the filler tube off the rear of the reservoir.
(6) Remove the windshield/headlamp washer reser-
voir filler tube mounting screw (Fig. 3).
(7) Reach up behind the windshield/headlamp
washer reservoir and pull the filler tube off of the
reservoir.
(8) Pull filler tube and hose up through left fender
and remove (Fig. 4).
INSTALLATION
(1) Reconnect the windshield/headlamp washer
reservoir filler tube to the reservoir.
(2) Install the windshield/headlamp washer reser-
voir filler tube mounting screw.
(3) Reinstall the front fascia as necessary. Refer to
Group 23, Body for Removal and Installation Proce-
dures.
(4) Lower vehicle from hoist.
(5) Refill the washer fluid.
(6) Reconnect the negative battery cable at the
remote battery post.
HEADLAMP WASHER HOSES
Removal
(1) Open hood and disconnect the negative battery
cable remote terminal from the remote battery post.
(2) Hoist vehicle.
(3) Remove the front fascia. Refer to Group 23,
Body for Removal and Installation procedures.
(4) Disconnect the headlamp washer hoses at the
quick disconnect connectors (Fig. 5) (Fig. 6).
(5) Remove the headlamp washer hoses from the
radiator closure panel.
Installation
(1) Install the headlamp washer hoses to the radi-
ator closure panel.
(2) Connect the headlamp washer hoses quick dis-
connect connectors (Fig. 5) (Fig. 6).
(3) Reinstall the front fascia. Refer to Group 23,
Body for Removal and Installation procedures.
(4) Lower vehicle from hoist.
(5) Refill the washer fluid.
(6) Reconnect the negative battery cable remote
terminal.
Fig. 3 Washer Reservoir Filler Tube Mounting Bolt
1 – SPEED CONTROL SERVO
2 – WASHER RESERVOIR FILLER TUBE
3 – WASHER RESERVOIR FILLER TUBE MOUNTING SCREW
Fig. 4 Washer Reservoir Filler Tube Removal
1 – WASHER RESERVOIR FILLER TUBE
2 – WASHER RESERVOIR
LH WIPER AND WASHER SYSTEMS 8K - 5
REMOVAL AND INSTALLATION (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID