SEAT AIRBAG MODULES
DESCRIPTION
The seat/side airbags are located in the front seat
backs (Fig. 5). One in each front seat. The seat air-
bag inflator assembly is within the module housing
(Fig. 4). Each module is mounted to the seat back
frame (Fig. 5).
OPERATION
Only the side impact airbag control module can
deploy the seat/side airbags. When supplied with the
proper electrical signal the seat airbag’s inflator will
produce a gas and discharge the bag directly between
the occupant and the side of the vehicle. Protecting
the occupant. Upon deployment, the seat back trim
cover will tear open and allow the side airbag to fully
inflate.
Fig. 4 Airbag Module
LH PASSIVE RESTRAINT SYSTEMS 8M - 5
DESCRIPTION AND OPERATION (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID
To Next Page
Loading...
