CRANKSHAFT DAMPER
REMOVAL
(1) Remove upper radiator crossmember. Refer to
BODY for procedure.
(2) Remove fan module and accessory drive belts.
Refer to COOLING SYSTEM for procedures.
(3) Remove damper center bolt while holding the
damper with Special Tool 8191 (Fig. 46).
CAUTION: Before removing damper, verify that A/C
belt tensioner is not contacting the damper, as
damage could occur to tensioner, timing chain
cover, and/or damper.
Fig. 45 Engine Lifting Fixture
1 – SPECIAL TOOL 8342 ENGINE LIFTING FIXTURE
2 – ATTACHING LOCATION
3 – ATTACHING LOCATION
LH 2.7L ENGINE 9 - 35
REMOVAL AND INSTALLATION (Continued)
To Next Page
Loading...
