Chrysler 2000 LHS - Rear Seat Cushion Cover J-Straps; Rear Seat Cushion Cover; Rear Seat Cushion Cover Hog Rings; Rear Seat Back Collar

REAR SEAT CUSHION COVER
REMOVAL
(1) Remove rear seat cushion.
(2) Disengage the J-strap retainers (Fig. 29).
(3) Cut hog rings to free cover (Fig. 30).
(4) Remove seat cushion cover from seat cushion.
INSTALLATION
(1) Position seat cushion cover on cushion.
(2) Install hog rings to seat cover.
(3) Engage the J-strap retainers.
(4) Steam wrinkles from seat cushion, if necessary.
(5) Install seat cushion.
Fig. 28 Rear Seat Back Collar
1 – PIVOT BRACKET
Fig. 29 Rear Seat Cushion Cover J-Straps
1 – J-STRAPS
Fig. 30 Rear Seat Cushion Cover Hog Rings
1 – HOG RINGS
23 - 20 BODY LH
REMOVAL AND INSTALLATION (Continued)