Chrysler 2000 LHS - CHMSL - Rear Shelf; Front Side Marker Lamp Bulb - Lhs; Parking, Side Marker, and Turn Signal Bulb

FRONT SIDE MARKER LAMP BULB – LHS
REMOVAL
(1) Reach under the fascia and remove the socket
from the side marker lamp housing (Fig. 8).
(2) Pull bulb from socket.
INSTALLATION
(1) Push bulb into socket.
(2) Install socket into front side marker lamp
housing.
(3) Verify park and front side marker lamp opera-
tion.
CHMSL BULB(S) – CONCORDE/LHS
REMOVAL
(1) Release decklid latch and open decklid.
(2) From under rear shelf panel, disconnect the
lamp socket from the CHMSL housing (Fig. 9).
(3) Remove bulb from the socket.
INSTALLATION
(1) Install the bulb into the socket.
(2) Install socket into CHMSL housing.
(3) Verify CHMSL operation.
CHMSL AND APPLIQUE LAMP BULB(S) –
INTREPID
REMOVAL
(1) Release decklid latch and open decklid.
(2) Remove decklid cover.
(3) Disconnect lamp socket from housing (Fig. 10).
(4) Remove bulb from socket.
INSTALLATION
(1) Install bulb into socket.
(2) Install socket into housing.
(3) Verify CHMSL operation.
(4) Install decklid cover.
Fig. 7 Parking, Side Marker, and Turn Signal Bulb -
Intrepid
1 – LOW BEAM
2 – PARKING AND TURN SIGNAL
3 – HIGH BEAM
Fig. 8 Front Side Marker Lamp Bulb – LHS
1 – FOG LAMP
2 – SIDE MARKER
Fig. 9 CHMSL – Rear Shelf
1 – CHMSL HOUSING
LH LAMPS 8L - 15
REMOVAL AND INSTALLATION (Continued)