(62) It is easier to fill the differential prior to
installing the transaxle back into the vehicle. The
differential holds 32 ounces of fluid.
DIFFERENTIAL CARRIER-RECONDITION
CAUTION: Ring gear bolts are not reusable. When
reassembling use new bolts.
NOTE: Mark ring gear location, if reusing ring gear.
NOTE: When reassembling differential, line up
notches on side of carrier.
CAUTION: When reassembling use a new roll pin.
NOTE: To remove inner and outer adjuster races,
use Tool 6062–A. To install inner and outer adjuster
races, use Tool 6522 and Tool C-4171.
Fig. 430 Dial Indicator Installation
1 – DIAL INDICATOR KIT C-3339
2 – ACCESS HOLE
Fig. 431 Remove Ring Gear Bolts
1 – RING GEAR BOLTS
2 – RING GEAR
Fig. 432 Tap Off Ring Gear
1 – DIFFERENTIAL CARRIER
2 – RING GEAR
3 – PLASTIC MALLET
Fig. 433 Pry Differential Carrier Apart
1 – DIFFERENTIAL CARRIER
2–PRYTOOL
3–PRYTOOL
21 - 138 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)
To Next Page
Loading...
