SPECIFICATIONS
COOLING SYSTEM CAPACITY
TORQUE
SPECIAL TOOLS
COOLING
ENGINE CAPACITY
2.7/3.2/3.5L 8.9 LITERS 9.4 QTS.
CAPACITY: Includes heater and coolant pressure
bottle.
Most service refills are about 80 percent of capacity
listed. This is because not all coolant is drained from
the cooling system.
DESCRIPTION N·m Ft.
Lbs.
In.
Lbs.
A/C Condenser to Radiator 5 — 45
A/C Belt Tensioner & Pulley
(2.7L)—Bolts
28 — 250
A/C Belt Tensioner Pulley
(3.2/3.5L)—Nut
54 40 —
Cooling System Bleed Screw
—(2.7L) 12 — 110
—(3.2/3.5L) 8 — 70
Condenser Inlet Tube Bracket—
Screw
5—45
Engine Oil Cooler
—Supply Lines to Engine 30 — 260
—Supply Lines to Radiator 18 — 160
Fan Module to Radiator—Screws 5 — 45
Fan Blade to Motor—Nut 5 — 45
Fan Motor to Shroud—Screws 3 — 25
Generator/Power Steering Belt
Tensioner Pulley—Nut
54 40 —
Thermostat Housing 12 — 105
Transmission Oil Cooler
—Hose Clamps 2 — 18
—Flare Nuts at Transmission 30 — 260
Water Pump Mounting—Bolts 12 — 105
Water Outlet Connector—Bolts 12 — 105
Filling Aid Funnel 8195
Belt Tension Gauge 7198
Hose Clamp Pliers 6094
Coolant Refractometer 8286
7 - 38 COOLING SYSTEM LH
To Next Page
Loading...
