Rohde & Schwarz R&S ZNA Series - CALCulate:TRANsform:VNETworks...

Command reference
R&S
®
ZNA
1144User Manual 1178.6462.02 ─ 29
Parameters:
<Unit> TIME | DISTance
TIME - x-axis scaled in time units.
DISTance - x-axis scaled in distance units (Distance = Time * c
0
* Velocity Factor).
Example:
*RST; :CALC:TRAN:TIME:STAT ON
Reset the instrument, activating a frequency sweep, and enable
the time domain transformation for the default trace.
CALC:TRAN:TIME:XAX DIST
Convert the x-axis scaling to distance units.
Manual operation: See " Time / Distance" on page 535
CALCulate:TRANsform:VNETworks...
The CALCulate:TRANsform:VNETworks... commands define and activate the cir-
cuit models for the different de-/embedding types. SeeChapter 4.6.2, "Embedding and
deembedding", on page 234 .
The circuit models are addressed by predefined enum constants. Except for the FIM-
Port model, that consists of a single snp file, the models and constants are different for
the different de-/embedding types.
Table 7-6: Circuit models for single ended port embedding/deembedding
Parameter Circuit model Pictogram
FIMPort File import, generic 2-port (no circuit model)
CSL Serial C, shunt L
LSC Serial L, shunt C
CSC Serial C, shunt C
SCPI command reference