GUI reference
R&S
®
ZNA
813User Manual 1178.6462.02 ─ 29
A green LED indicates that the respective building block is active. However the calcula-
tion chain can also be shortened using the [Slider] control below the building blocks.
[Slider]
Allows you to shorten the simulation/calculation chain without deactivating the building
blocks at the tail end.
Remote command:
CALCulate<Chn>:EYE:VIEW
Define Colors...
See "Define Colors" on page 811
Generator
The "Generator Settings" dialog gives full access to the "virtual" signal generator of the
related eye diagram simulation. Most of the settings are also available in the Eye Dia-
gram dialog.
Access: "Generator" button in the Advanced Settings dialog
This dialog is available with Extended time domain analysis option R&S ZNA-K20 only.
Simulated Bit Pattern / Simulated Rise Time
See Chapter 5.17.2.5, "Eye Diagram dialog", on page 809
Modulation
See "Modulation" on page 811
Applic softtool
To Next Page
Loading...
