GUI reference
R&S
®
ZNA
514User Manual 1178.6462.02 ─ 29
Search Left/Search Right
Searches the Target Value to the left/right of the active marker's stimulus value within
the current search range (see Chapter 5.7.3.2, "Search Range dialog", on page 506).
If the search is successful, the active marker is moved to the next smaller/larger stimu-
lus value with this target value. Use "Search Left"/"Search Right" repeatedly to locate
the other ones.
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute LTARget
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:EXECute LTARget
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:RESult?
Search Mode
Displays and sets the current marker search mode.
Select one of the predefined max, min, peak, or target searches or select "Sweep Pro-
gress" to track the position of the sweep cursor.
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:EXECute
5.7.6 Bandfilter tab
"Bandfilter" search allows you to search for trace segments with a bandpass or band-
stop shape, and determine characteristic filter parameters.
Background information
Refer to "Bandfilter search" on page 133.
Bandfilter for arbitrary scalar traces
"Bandfilter" search can be used for a broad range of measured quantities (see Chap-
ter 5.2, "Meas softtool", on page 341). To obtain real filter parameters, the trace format
must be "dB Mag", the measured quantity must be a transmission S-parameter and a
frequency sweep must be performed. However, for other formats, measured quantities
or sweep types, the "Bandfilter" functions can still be useful to analyze general trace
properties.
Marker softtool
To Next Page
Loading...
