Rohde & Schwarz R&S ZNA Series - Messages tab

GUI reference
R&S
®
ZNA
863User Manual 1178.6462.02 ─ 29
Remote command:
SYSTem:DISPlay:TRACes:CCOunt
Decimal Places
Defines the number of fractional digits for quantities with different physical units. The
settings affect entries and results, e.g. the values in the marker lists.
Note: If your instrument is equipped with option R&S ZNA-K19, 1 mHz Frequency
Resolution, set "Decimal Places" of unit "Hz" to 12 to utilize the high frequency resolu-
tion.
Remote command:
n/a
Units Prefix
Sets the unit prefix for frequencies (Base unit: Hz) to kilo (k), mega (M), giga (G) or
tera (T) or lets the R&S ZNA select the appropriate prefix ("Auto" = default setting).
Remote command:
n/a
Reset Colors / Reset Dialogs / Reset Decimal Places / Reset Units Prefix
Resets the color settings ("System" > "Display" < "Config"), the dialog properties, the
"Decimal Places" and the "Units Prefix" settings. These settings are global and not
affected by an instrument preset.
Remote command:
n/a
Messages tab
Defines which instrument events are indicated by an information popup.
Display of information popups can be globally disabled or limited to certain event types.
Setup softtool