Rohde & Schwarz R&S ZNA Series - Define Pulse Train dialog

GUI reference
R&S
®
ZNA
697User Manual 1178.6462.02 ─ 29
Remote command:
[SENSe<Ch>:]PULSe:COUPled[:STATe]
Pulse Delay/Pulse Width
Defines the delay and width of the internally generated pulses.
Remote command:
[SENSe<Ch>:]PULSe:PORT<Pt>:DELay
[SENSe<Ch>:]PULSe:PORT<Pt>:WIDTh
[SENSe<Ch>:]PULSe:GENerator<Id>:DELay
[SENSe<Ch>:]PULSe:GENerator<Id>:WIDTh
TRIGger:CHANnel<Ch>:AUXiliary<n>:DELay
TRIGger:CHANnel<Ch>:AUXiliary<n>:DURation
Pulse Train
Pulse trains can only be configured for the port-related pulse generators. The "Pulse
Train" button opens the "Define Pulse Train dialog" on page 697 that allows you to
configure the pulse train.
Define Pulse Train dialog
Allows you to configure the pulse train for the related port.
Enable Pulse Train
Enables the configured pulse train.
Remote command:
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin[:STATe]
Pulse Train Period
See "Pulse Period" on page 695.
Remote command:
[SENSe<Ch>:]PULSe:GENerator:TRAin:PERiod
Segment List
Defines the segments of the pulse train. Use "Add" and "Delete" to add/delete seg-
ments. Use "Delete All" to delete all segments.
Mode softtool