Command reference
R&S
®
ZNA
1446User Manual 1178.6462.02 ─ 29
Example:
:SYSTem:COMMunicate:RDEVice:GDEVice1:DEFine
'VXI-11','192.168.0.1'
:SYSTem:COMMunicate:RDEVice:GDEVice2:DEFine
'VXI-11','192.168.0.2'
Configure two generic external devices.
SENSe:GDEVice:ADDRess?
Query the configured generic device addresses. The result is
'192.168.0.1','192.168.0.2'.
:SENSe1:GDEVice:SELect '192.168.0.1',
'test.json','MySetting1'
:SENSe1:GDEVice:SELect '192.168.0.2',
'test.json','MySetting2'
Configure the commands to be sent to the devices before chan-
nel 1 is measured. The commands 'MySetting1' and 'MySetting2'
are defined in a command file test.json that is located in the
current directory.
:SENSe1:GDEVice:DELete '192.168.0.1'
For channel 1, no command is sent to generic device 1.
:SENSe1:GDEVice:DELete
For channel 1, no commands are sent to any generic devices.
Manual operation:
See "Config. File/Command" on page 926
7.3.14.13 [SENSe:]HARMonic...
Implements functions related to harmonic grids for time domain transformation.
[SENSe<Ch>:]HARMonic?............................................................................................1446
[SENSe<Ch>:]HARMonic:AUTO....................................................................................1447
[SENSe<Ch>:]HARMonic:DLENgth:DATA...................................................................... 1447
[SENSe<Ch>:]HARMonic:ELENgth:DATA.......................................................................1447
[SENSe<Ch>:]HARMonic:MLENgth:DATA...................................................................... 1447
[SENSe<Ch>:]HARMonic:PERMittivity:DATA.................................................................. 1448
[SENSe<Ch>:]HARMonic:RTIMe:DATA..........................................................................1448
[SENSe<Ch>:]HARMonic:RTIMe:THReshold..................................................................1448
[SENSe<Ch>:]HARMonic:VELocity:DATA.......................................................................1449
[SENSe<Ch>:]HARMonic?
Queries whether the current frequency grid is harmonic.
Suffix:
<Ch>
.
Channel number
Return values:
<arg0>
Usage: Query only
Manual operation: See "Is the Current Grid Harmonic?" on page 451
SCPI command reference
To Next Page
Loading...
