Rohde & Schwarz R&S ZNA Series - Page 1447

Command reference
R&S
®
ZNA
1447User Manual 1178.6462.02 ─ 29
[SENSe<Ch>:]HARMonic:AUTO <arg0>
Turns the "Automatic Harmonic Grid" function ON or OFF.
Suffix:
<Ch>
.
Channel number
Parameters:
<arg0> *RST: ON
Options: R&S ZNA-K2
Manual operation: See "Automatic Harmonic Grid" on page 452
[SENSe<Ch>:]HARMonic:DLENgth:DATA
<DUTLength>
Sets/gets the expected maximum time delay through the DUT.
The set command automatically activates the "Automatic Harmonic Grid" function, i.e.
it sets [SENSe<Ch>:]HARMonic:AUTO to ON.
Suffix:
<Ch>
.
Channel number
Parameters:
<DUTLength> Default unit: s
Options: R&S ZNA-K20
Manual operation: See "Max. DUT Measure Delay / Max. El. Length / Max. Mech.
Length" on page 804
[SENSe<Ch>:]HARMonic:ELENgth:DATA <DUTELength>
Sets/gets the expected maximum electrical length of the DUT.
The set command automatically activates the "Automatic Harmonic Grid" function, i.e.
it sets [SENSe<Ch>:]HARMonic:AUTO to ON.
Suffix:
<Ch>
.
Channel number
Parameters:
<DUTELength> Default unit: m
Options: R&S ZNA-K20
Manual operation: See "Max. DUT Measure Delay / Max. El. Length / Max. Mech.
Length" on page 804
[SENSe<Ch>:]HARMonic:MLENgth:DATA <DUTMLength>
Sets/gets the expected maximum mechanical length of the DUT.
The set command automatically activates the "Automatic Harmonic Grid" function, i.e.
it sets [SENSe<Ch>:]HARMonic:AUTO to ON.
SCPI command reference