Rohde & Schwarz R&S ZNA Series - Timing diagram

GUI reference
R&S
®
ZNA
694User Manual 1178.6462.02 ─ 29
From left to right:
●
The master pulse of the internal pulse generators can either be provided internally
("Pulse Period") or externally, via one of the Trigger In connectors.
●
The internal pulse modulators can be controlled either via internal pulse generators
or externally, via the PuMo In/Out connectors. The latter requires the optional trig-
ger board R&S ZNA-B91.
●
If the optional trigger board R&S ZNA-B91 is available, the internal pulse generator
signals can also be provided to external pulse modulators.
– Via the PuMo In/Out connectors
– Via the Trigger Out connectors
Timing diagram
This diagram visualizes the time and delay settings of the internal pulse modulators,
the pulse generator signals provided via the Trigger Out, the ALC, and the data acqui-
sition.
Mode softtool