Rohde & Schwarz R&S ZNA Series - 7.4 HUMS and service date commands

Command reference
R&S
®
ZNA
1671User Manual 1178.6462.02 ─ 29
[SENSe<Ch>:]PPORt<PPort>:BSHift <stimulus settings index>, <buffer shift value>
[SENSe<Ch>:]PPORt<PPort>:BSHift? <stimulus settings index>
Suffix:
<Ch>
.
<PPort>
Parameters:
<buffer shift value>
Parameters for setting and query:
<stimulus settings
index>
[SENSe<Ch>:]PRANge
<Power Range, Tmp command>
Suffix:
<Ch>
.
Parameters:
<Power Range, Tmp
command>
SYSTem:CORRection:FMPort[:STATe] <arg0>
Enables or disables Fast Multiport Correction.
Parameters:
<arg0> ON | OFF – Enable or disable fast multiport correction.
*RST: *RST has no effect on the calibration algorithm.
Example:
SYST:CORR:FMP ON
Enable fast multiport correction.
7.4 HUMS and service date commands
This section provides the commands that are related to the Rohde & Schwarz Health
and usage monitoring service (HUMS), which is available on various Rohde & Schwarz
instruments.
For background information, see the R&S HUMS User Manual.
● SNMP/REST commands.....................................................................................1672
● System information commands...........................................................................1675
● Device tags commands.......................................................................................1685
● Utilization commands..........................................................................................1686
● Service date commands......................................................................................1693
HUMS and service date commands