Rohde & Schwarz R&S ZNA Series - 5.18.5 Touchscreen tab; 5.19 Setup softtool; 5.19.1 Setup tab

GUI reference
R&S
®
ZNA
854User Manual 1178.6462.02 ─ 29
Additional Function: Minimize/Mazimize the Softtool Panel
The softtool panel can be minimized/maximized via the cross/hamburger icon at its top
left corner.
Remote command:
SYSTem:DISPlay:BAR:STOols[:STATe]
5.18.5 Touchscreen tab
Allows you to lock the touchscreen functionality of the R&S ZNA to prevent inadvertent
entries.
Enabled / Lock Diagrams / Lock Screen
●
"Enabled" – touchscreen control of the R&S ZNA fully enabled. All control elements
are active.
●
Lock diagrams – drag and drop functions in the diagrams are disabled, all other
control elements (e.g. the softtool panels) are still active.
●
Lock screen – all control elements are locked. Pressing any front panel key on the
analyzer (or sending SYSTem:TSLock OFF) re-enables touchscreen control.
Remote command:
SYSTem:TSLock
5.19 Setup softtool
The "Setup" softtool allows you to define various system-related settings, to manage
global resources, to get system information and to execute service functions.
Access: System – [Setup]
Persistent vs. session settings
The settings in the "Setup" softtool and the configuration dialogs are global settings
and not affected by a "Preset" or shutdown of the analyzer.
5.19.1 Setup tab
Gives access to system-wide properties, settings, resources and service functions.
Setup softtool