GUI reference
R&S
®
ZNA
918User Manual 1178.6462.02 ─ 29
In the "Edit" dialog, define the appropriate test port or select "Set Unused" to delete the
test port assignment. Configuration errors are displayed in balloon popups appearing
at the lower left corner of the "Switch Matrix RF Connections" dialog.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MTESt
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MLTest
SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:TVNA
5.19.8 Port Setup tab
Collects functions for the (re) definition of internal and external physical ports and their
signal paths.
Setup softtool
To Next Page
Loading...
