GUI reference
R&S
®
ZNA
782User Manual 1178.6462.02 ─ 29
Simulation Noise
Allows you to add random noise to the loaded simulation data to let the traces appear
more "realistic" (see Chapter 4.7.45.2, "Simulation noise", on page 337). By default,
"Simulation Noise" is inactive.
Make sure to deactivate "Simulation Noise" before exporting traces to file. Otherwise
your exported results comprise an "artificial" random component.
Exit
Persists the current state of all opened setups and ends the analyzer session. These
states are automatically recalled when the analyzer application is restarted.
Tip: This button is equivalent to the Windows
®
"Close window" command and to the
close icon
in the title bar of the main firmware application window.
5.16 DUT softtool
The "DUT" softtool comprises a single "DUT Meas" tab, which provides functions for
configuring and managing DUTs and for DUT-centric measurement setup.
Access: System – [DUT]
5.16.1 DUT Centric Wizard
The "DUT Centric Wizard" guides you through the measurement setup for certain fun-
damental DUT types.
Access: System – [DUT] > "DUT Centric Wizard"
DUT softtool
To Next Page
Loading...
