Rohde & Schwarz R&S ZNA Series - 7.3.14.14 [SENSe:]LPORt...

Command reference
R&S
®
ZNA
1449User Manual 1178.6462.02 ─ 29
Suffix:
<Ch>
.
Channel number
Parameters:
<DUTRiseThreshold> T1_9 | T2_8
Rise time definition:
T1_9: 10%-90%
T2_8: 20%-80%
*RST: T2_8
Options: R&S ZNA-K20
Manual operation: See "Rise Time Definition" on page 805
[SENSe<Ch>:]HARMonic:VELocity:DATA <DUTVelocity>
Sets/gets the velocoty factor of the DUT.
The set command automatically activates the "Automatic Harmonic Grid" function, i.e.
it sets [SENSe<Ch>:]HARMonic:AUTO to ON.
Suffix:
<Ch>
.
Channel number
Parameters:
<DUTVelocity>
Options: R&S ZNA-K20
Manual operation: See "Permittivity / Velocity Factor" on page 804
7.3.14.14 [SENSe:]LPORt...
The [SENSe:]LPORt... commands define the reference impedances of the bal-
anced ports.
[SENSe<Ch>:]LPORt<LogPt>:ZCOMmon...................................................................... 1449
[SENSe<Ch>:]LPORt<LogPt>:ZDIFferent.......................................................................1449
[SENSe<Ch>:]LPORt<LogPt>:ZDEFault[:STATe].............................................................1450
[SENSe<Ch>:]LPORt<LogPt>:ZCOMmon <RealPart>[, <ImaginaryPart>]
[SENSe<Ch>:]LPORt<LogPt>:ZDIFferent <RealPart>[, <ImaginaryPart>]
These commands specify the complex common mode and differential mode reference
impedances for the balanced (logical) port numbered <LogPt>.
Use [SENSe<Ch>:]LPORt<LogPt>:ZDEFault[:STATe] to toggle between config-
ured and default reference impedances.
Suffix:
<Ch>
.
Channel number
SCPI command reference