Rohde & Schwarz R&S ZNA Series - 3.5 Getting started with R&S ZNA67 EXT; 3.5.1 Safety and regulatory information

Getting Started
R&S
®
ZNA
79User Manual 1178.6462.02 ─ 29
●
Some of the trace formats are particularly suited for reflection measurements. For
instance, you can display the measured reflection coefficient S
11
in a Smith chart to
obtain the complex input impedance at port 1.
Proceed as described in Chapter 3.1.7, "Switching the instrument on and off",
on page 28 to shut down your analyzer.
3.5 Getting started with R&S ZNA67EXT
This section provides getting started information on the R&S ZNA67EXT family of
110 GHz VNA systems. These systems are based on:
●
A vector network analyzer R&S
®
ZNA67, order no. 1332.4500Kyy, either with two
ports (yy=62) or with four ports (yy=64).
●
Two or four external test sets, each consisting of:
–
A frequency converter R&S
®
ZVA-Z110, WM-2540 (WR10), order no.
1352.1642.yy, either standard power (yy=40) or high power (yy=50)
–
A diplexer R&S
®
ZVA-ZD110, order no. 1314.4002.zz, either with connectors on
the left side (zz=12) or on the right side (zz=18)
● Safety and regulatory information........................................................................... 79
● Key features............................................................................................................81
● Preparing for use.....................................................................................................82
● System tour.............................................................................................................85
● Putting the system into operation............................................................................92
● Connecting the external test sets............................................................................93
● Basic operation....................................................................................................... 99
3.5.1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Getting started with R&S
ZNA67EXT