Rohde & Schwarz R&S ZNA Series - 7.3.14.15 [SENSE:]NFIGure...; [SENSe<Ch>:]NFIGure:QSET...

Command reference
R&S
®
ZNA
1451User Manual 1178.6462.02 ─ 29
7.3.14.15 [SENSE:]NFIGure...
The [SENSE:]NFIGure... commands define properties of a Noise figure measure-
ment.
[SENSe<Ch>:]NFIGure:QSET...
The [SENSe<Ch>:]NFIGure:QSET... commands implement the functions of the NF
quickset dialog.
[SENSe<Ch>:]NFIGure:QSET:ATTReceiver....................................................................1451
[SENSe<Ch>:]NFIGure:QSET:ATTSource...................................................................... 1451
[SENSe<Ch>:]NFIGure:QSET:DUT:ENFigure................................................................. 1451
[SENSe<Ch>:]NFIGure:QSET:DUT:GAIN....................................................................... 1452
[SENSe<Ch>:]NFIGure:QSET:DUT:POWer.....................................................................1452
[SENSe<Ch>:]NFIGure:QSET:TNOise........................................................................... 1452
[SENSe<Ch>:]NFIGure:QSET[:EXEC]........................................................................... 1452
[SENSe<Ch>:]NFIGure:QSET:ATTReceiver <External Attenuator at the Receiving
Port>
Suffix:
<Ch>
.
Parameters:
<External Attenuator
at the Receiving Port>
Default unit: dB
Manual operation: See "Receiving Port" on page 379
[SENSe<Ch>:]NFIGure:QSET:ATTSource <External Attenuator at the Source Port>
Suffix:
<Ch>
.
Parameters:
<External Attenuator
at the Source Port>
Default unit: dB
Manual operation: See "Driving Port" on page 378
[SENSe<Ch>:]NFIGure:QSET:DUT:ENFigure <Expected DUT Noise Figure>
Suffix:
<Ch>
.
Parameters:
<Expected DUT Noise
Figure>
Default unit: dB
Manual operation: See "DUT Settings" on page 377
SCPI command reference