Rohde & Schwarz R&S ZNA Series - Step 2: Connectors and Cal Kits

GUI reference
R&S
®
ZNA
646User Manual 1178.6462.02 ─ 29
"Normal"/"Nor-
mal with AVG"
The sample detector without/with (automatic) averaging. This is the
default detector for all other channels, if Auto Averaging is disabled/
enabled.
Remote command:
[SENSe<Ch>:]CORRection:COLLect:DETector
[SENSe:]CORRection:COLLect:AVERage
Step 2: Connectors and Cal Kits
Connector/Gender
Specifies the connector and gender of the ports selected in Step 1: Ports and Type.
Note that METAS compatible file formats do not contain information about the related
connector type, so you have to make sure to choose a suitable Cal Kit.
Remote command:
see Connector / Gender
Cable
Allows you to specify which cables are connected to the related ports.
The cable models are read from the METAS VNA Tools database. Additional cable
models can be added on a project-specific basis.
Remote command:
[SENSe:]CORRection:METas:CABLe:CATalog?
[SENSe<Ch>:]CORRection:METas:CABLe:TYPE
Cal softtool