Rohde & Schwarz R&S ZNA Series - 7.3.1.7 CALCulate:LDEViation...

Command reference
R&S
®
ZNA
1052User Manual 1178.6462.02 ─ 29
Parameters:
<String> Directory path, either absolute or relative to the current directory
(MMEMory:CDIRectory).
Manual operation: See "Output Settings" on page 729
CALCulate:FMODel:DIRectory:DEFault
Resets the common working directory of the ISD, SFD, and EZD tool to its default
C:\Users\Public\Documents\Rohde-Schwarz\ZNA\Embedding.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Output Settings" on page 729
CALCulate:FMODel:DIRectory:DEFault:CLEar
Deletes all files in the common default working directory of the of the ISD, SFD, and
EZD tool (C:\Users\Public\Documents\Rohde-Schwarz\ZNA\Embedding).
Usage:
Event
Manual operation: See "Output Settings" on page 729
CALCulate:FMODel:REName <Boolean>
If set to ON (1), the names of subsequently generated "Test Coupon" and "DUT + Test
Fixture" files are prefixed with the current date and time.
Parameters:
<Boolean>
Manual operation: See "Output Settings" on page 729
7.3.1.7 CALCulate:LDEViation...
CALCulate<Chn>:LDEViation:AUTO..............................................................................1052
CALCulate<Chn>:LDEViation:CONStant........................................................................ 1053
CALCulate<Chn>:LDEViation:ELENgth..........................................................................1053
CALCulate<Chn>:LDEViation:MODE............................................................................. 1054
CALCulate<Chn>:LDEViation:SLOPe............................................................................ 1054
CALCulate<Chn>:LDEViation:AUTO <Activate>
Initiates a (re-)calculation of the linearity deviation correction factors and applies them
to the active trace.
SCPI command reference