Rohde & Schwarz R&S ZNA Series - 7.4.3 Device tags commands

Command reference
R&S
®
ZNA
1685User Manual 1178.6462.02 ─ 29
DIAGnostic:HUMS:SYSTem:STATus:SUMMary?
Queries the status summary of the complete system.
Return values:
<StatusSummary> OK
The system is OK.
WARNing
There are some issues with the system which might be critical
later.
ERRor
Problems with the system occurred and the status is critical.
Example: //Return status summery of the system
DIAG:HUMS:SYST:STAT:SUMM?
Usage: Query only
7.4.3 Device tags commands
DIAGnostic:HUMS:TAGS:ALL?..................................................................................... 1685
DIAGnostic:HUMS:TAGS[:VALue]..................................................................................1685
DIAGnostic:HUMS:TAGS:DELete.................................................................................. 1686
DIAGnostic:HUMS:TAGS:DELete:ALL............................................................................1686
DIAGnostic:HUMS:TAGS:ALL?
Queries all key-value tags that you have assigend to the instrument. Depending on the
set data format, the queried data is either displayed in XML or JSON format. For more
information about setting the data format, see DIAGnostic:HUMS:FORMat
on page 1679.
Return values:
<ID> ID number of the defined tag.
<Key> String containing key name of the defined tag.
<Value> String containing value of the defined tag.
Example: //Return all tags
DIAG:HUMS:TAGS:ALL?
1,"location","building_11",2,"time zone","CET"
Usage: Query only
Manual operation: See "Add / Delete (Trash) / Delete All" on page 873
DIAGnostic:HUMS:TAGS[:VALue] <ID>, <Key>, <Value>
DIAGnostic:HUMS:TAGS[:VALue]? <ID>
Adds or modifies a key-value pair (device tag).
HUMS and service date commands