Rohde & Schwarz R&S ZNA Series - 5.19.1.3 Info dialog; Common controls in the Info dialog

GUI reference
R&S
®
ZNA
874User Manual 1178.6462.02 ─ 29
5.19.1.3 Info dialog
The "Info" dialog displays information about the instrument and its operation. All func-
tions are primarily intended for error diagnostic and service purposes; see Chapter 9.3,
"Collecting information for technical support", on page 1768. Many "Info" tabs also dis-
play softkeys for printing the contents or saving them to a file.
Access: System – [Setup] > "Setup" > "Info..."
Common controls in the Info dialog
The "Save...", "Print... ", and " Save Report" buttons at the bottom of the "Info" dialog
allow you to save the contents of the open tab to a file or to create a hardcopy.
Save...
Allows you to save the contents of the open tab to an HTML file.
Remote command:
DIAGnostic:DEVice:STATe
SYSTem:DFPRint?
Print...
Allows you to print the contents of the open tab. Opens a "Print Preview" dialog for
printer and paper setup.
Setup softtool